Registration = 10€

For your registration to our newsletter you will receive a 10 € voucher as a thank you.2

(In accordance with the data protection declaration, please send me regular and revocable information on the following product range by e-mail: Bicycles, fitness equipment and bicycle accessories)

Instagram Second Quality Bikes E-Bike ab 1099 €

Assembly instructions for mountain bikes (27.5" / 29"), trekking bikes, fitness bikes, crossbikes, racing bikes and e-bikes

1. Open carton

1. Open carton

Open the top of the box by carefully cutting the adhesive strips and removing the clamps.

Attention! Never cut the carton with a knife. You could damage the wheel or parts.

and remove the wheel

and remove the wheel

Remove the complete wheel and the accessory box. Put the tool (not included), the quick-releases and the pedals from the accessory box on the side so that they are ready to hand.

2. Remove transport protection

2. Remove transport protection

Remove the transport protection with scissors or a knife.

and unpack handlebars

Carefully unpack the handlebars from the protective film.

3. Screw on stem

3. Screw on stem

Open the stem with a 5mm allen key to remove the handlebar clamp.

and remove all screws and handlebar clamp.

and remove all screws and handlebar clamp.

All four screws and the handlebar clamp must be removed completely.

4. Insert handlebars

4. Insert handlebars

Center the handlebars in the middle.

and screw tight

and screw tight

Put on the handlebar clamp and tighten it evenly with all four screws.

5. Mount the pedals

5. Mount the pedals

Each pedal has a small marking (L and R). This indicates on which side of the wheel the pedal must be mounted.

Attention! Never swap the left and right pedals. Please read the attached info sheet.

and tighten

and tighten

The left pedal has a left-hand thread, the right pedal a right-hand thread. Tighten the pedals with a 15 mm open-end wrench to approx. 35 Nm.

6. Test drive

6. Test drive

Check the tire pressure. Refer to the operating instructions for the correct tyre pressure. Then take a test drive.

Please follow the operating instructions

Important! Read the instruction manual carefully before using your bike for the first time. Pay particular attention to the instructions for maintenance and care of the bike.